Our Service Centre is equipped with the most effective processing equipment and cutting to size, so we can meet all of our customer's needs.

Slitting:

Thickness: from 0.15 to 6.00 mm.

Width: 8.0 to 1500 mm (can be cut to length).

Vinyl Coated: 1 or 2 sides.

Edge conditioning: 200 mm maximum width.

Width tolerances: according to thickness.

Coil Processing:

Thickness: from 0.40 to 6.00 mm. (Cold rolled only)

Width: 1000 - 1250 - 1500 mm.

Vinyl Coated: 1 or 2 sides.

Coil Weights: 200 - 500 - 1000 kg.

De-Coiling:

Thickness: from 0.40 to 10.00 mm.

Width: 80 to 2000 mm.

Lengths: from 200 to 14500 mm.

Vinyl Coated: 1 or 2 sides.

Marking sheets to ensure traceability.

Shearing:

Thickness: from 0.40 to 10.00 mm.

Width: 30 to 1500 mm.

Lengths: 20 to 4000 mm.

Vinyl Coated: 1 or 2 sides.

Circling:

Thickness: from 0.40 to 2.00 mm.

Diameter: 100 to 1000 mm.

Vinyl Coated: 1 or 2 sides.

Tolerances: 2 mm.

Our finishing section guarantees a quality service up to the last detail.

Polished strips / sheets (abrasive belt):

Grains: 80 to 400 (Standard 220)

Thickness: 0.40 to 4.00 mm

Width: 1500 mm (Plates until 2000mm)

Polishing and plastic: Demand 1 or 2 sides

Satin strips / plates (scotch-brite):

Thickness: 0.40 to 4.00 mm

Width: 1500 mm

Satin and poly-coated: Demand 1 or 2 sides

Ask about our special finish DUPLO (grinding + glossy), performed only on plates

Polished plates:

Thickness: 0.40 to 6.00 mm

Width: 1500 mm. (Refer to the width of 2000mm)

Long Sheet: 500 to 7000 mm

Polished and vinyl coated: Demand 1 or 2 sides

Circle polished:

Damask diameters: 30 and 50 mm

Thickness: 0.40 to 6.00 mm

Width of plates: from 250.00 to 2000 mm

Lenght of sheets: 400 to 6000 mm

Circle polished vinyl coated: Demand 1 or 2 sides